Posts Tagged ‘camera’s shutter’

Some Shooting Tips For DSLR Users

You’re ready to start shooting close-ups. I’m ready to give you some helpful tips. Try these on for size as you shoot your first macros.

Focus carefully. Some cameras allow switching autofocus to a center-oriented mode or spot mode or let you choose which focus sensor to use. Use those features if your subject matter is indeed in the middle of the picture or somewhere within one of the focus zones. Or, switch to manual focus if your camera offers it. You might want to use aperture-priority mode and select the smallest f-stop available to increase the depth-of-field. And keep in mind what you learned about how depth-of-field is arranged: Two-thirds is allocated to the area in front of the plane of sharpest focus, and only one-third to the area behind it.

Watch alignment. If you’re shooting your subject head-on, check to make sure the back of the camera (where the sensor is located) is parallel to the plane in which your main subject lies. That’s the plane you’ll be focusing on and where the maximum amount of sharpness lies. If the camera is tilted in relation to the plane of the main subject, only part of the subject will be in sharp focus.

Stop that jiggle! If your subject is inanimate and you’re using a tripod, consider using your digital camera’s self-timer or remote control to trip the shutter after a delay of a few seconds. Even if you press the shutter release button cautiously, you may shake the camera a little. Under incandescent illumination with a small f-stop, your camera will probably be using a slow shutter speed that is susceptible to blurring with even a little camera shake. Use of the self-timer or remote control will let the camera and tripod come to rest.4.)

Stop, look, listen! Wait a few seconds after you hear the camera’s shutter click before doing anything. You might have forgotten that you’re taking a long time exposure of a couple seconds or more! The click might have been the shutter opening, and the camera may still be capturing the picture. If you have picture review turned on, wait until the shot shows up on the LCD before touching the camera.